Stamping Die Parts- A Major Aspect of Sheet Metal Forming

Massive presses known as stamping presses are utilized to perform the stamping procedure. Mechanical, hydraulic, and mechanical servo presses are the three most often utilized types of presses. Typically, these presses are attached to a feeder that automatically feeds coils or blank sheet metal through the press. The components of the stamping dies and stamping presses are described here.

These stamping die components are described below in brief.

Shoes, die plates, and die sets: These are the same size as the die and are composed of steel or aluminum. Together, these three serve as the cornerstone of functional stamping die components. These stamping die parts must be ground or machined to maintain their parallelism and flatness. Because it is more resilient, lightweight, and easily machined, aluminum is a fantastic material for these stamping die components. Die pins are used to secure the upper and lower die shoes that make up the stamping die set. The amount of pressure on stamping die parts China that is anticipated throughout the cutting and carving operation determines the thickness of the stamping die shoe.

Guide pins and bushings:

Both of these aids in maintaining the alignment of the upper and lower stamping die shoes. They come in two fundamental varieties: friction pins and bearing style pins. They are both quite small. Hardened steel is used to make these pins, while aluminum-bronze is used to make the bushings. The top and lower stamping die shoes may be separated thanks to these pins, which also serve to lessen friction.

Heel Plates and Blocks:

The upper and lower stamping die shoes are attached to steel heel blocks. Any side pressure that could be created during the cutting and carving operation is lessened by the wear plates inside of them. These blocks are necessary because force applied from a single direction may bend the guide pins and increase the possibility of incorrect alignment throughout the procedure.

Keys, dowels, and screws:

Screws are used to secure the top and lower die shoes. Dowels assist in putting the die shoes in their proper location. Steel keys are used to locate die portions and their stamping die parts.